Kodiak 9 cu ft Solar (DC) Refrigerator and 400 Watt Solar Power Kit KOG9RFDC-Kit
This kit contains everything you need to run this refrigerator on solar power only except a battery. If you need to add the battery choose the BDSRS-B12200 in related products below.
About the Refrigerator
9 cu ft DC Refrigerator-Freezer
Description: Recessed handle; 1 glass shelf in freezer; 3 glass shelves in refrigerator; 1 crisper drawer; 4 plastic door shelves
Net volume: 245L / 8.65 cu ft
Freezer volume: 1.84 cu ft
Refrigerator volume: 6.81 cu ft
Freezer temperature range: -4°
Refrigerator temperature range: 32-50°
Outside dimensions: H 63" x W 21 1/4" x D 22"
Inside Freezer dimensions: H 13" x W 15 1/2" x D 16"
Inside Refrigerator dimensions: H 43" x W 18" x D 17"
DC Powered: 12v/24v
Average Running Watts: 83W
Crocodile Power Cable
Net Weight: 90 lbs
Shipping Weight 127 lbs
When comparing DC appliance consumption vs AC appliances remember that you can expect to lose 20%-30% of your power using your solar inverter to change the DC current to AC current.
Manufacturers recommend connecting refrigerators and freezers directly to the battery bank and not to the DC power output of your charger or inverter. This is because they may not provide enough starting power and could damage the compressor over time.
If you battery bank voltage is higher than 24v you can use a buck converter (see related products) to reduce the voltage going to the appliance.
About the Solar Kit
Our most popular 12V kit! This 400W kit contains 2 of our high efficiency 200W Monocrystalline panels with 9 busbars and our 40A MPPT controller that can be expanded to 600W on a 12V system. This kit can be paired with our 200AH 12V Lithium battery. For a quieter, more peaceful outdoor experience, go solar now and start powering your RV, boat or trailer!
2 x 200 Watt Monocrystalline Solar Panel 1 x 40A MPPT Solar Charge Controller 1 x 20' #10 Gauge Solar Cable (Red), connects solar panel to controller 1 x 20' #10 Gauge Solar Cable (Black), connects solar panel to controller 1 x 10' #8 Gauge Battery Cable (Red), connects controller to battery 1 x 10' #8 Gauge Battery Cable (Black), connects controller to battery 2 x Mounting Z Brackets (one set of 4) 1 x 15A Inline Fuse Holder with Fuse
High Efficiency Solar Panel With the highest grade monocrystalline solar cells for optimal output, our 200 watt panel is treated with anti-reflective coating to maximize light absorption.
Simple Installation Installation is a breeze with our pre-assembled wiring harness that doesn’t require crimping tools. Since all of our products are compatible with each other, makes expansions, upgrades or additions simple and easy… just plug in and go!
Reliable and Convenient The digital MPPT charge controller lets you gauge your power with a glance, providing real time updates of volts, amps, and amp hours. provide peace of mind by protecting your system from overcharging.
25-Year Output Warranty Buy with confidence knowing that your solar investment will last for the long-haul.
200 Watt Solar Panel Specifications
Maximum Power(Pmax): 200W Maximum Power Voltage (Vmp): 20.4V Maximum Power Current (Imp): 9.80A Open Circuit Voltage (Voc): 24.3V Short Circuit Current (Isc): 10.2A Weight: 26.5 lbs Dimensions: 58.7 x 26.8 x 1.4 in Warranty: 25 years output warranty
WARNING:This product can expose you to chemicals including nickel (metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. Note: Nickel is a component of stainless steel.
You may also like